HELP!!!! I am trying to install an after market turn signal wiring into my 55 ford f100. but when I get the wires all hooked up and turn the signal left or right all the lights flash...I had the turn indicator checked out and it checked out good. I hooked the wires up the way that I was told to...I dunno what to do...HELP!!!!

Sounds like a ground problem, check your light assemblies, and see if their grounded. It sounds like it's backfeeding back into the circuit.

Shoulda, you gotta find (out of the three)the left light wire, and the left flashing wire from the source and connect them together.<br><br>Something is back feeding. I'll bet that your brake lights aren't working right either.<br><br>There are only three wires going to the rear. One is the tail light wire (both sides)the other two share the brake light with left signal and right signal.<br><br>Hope this helps,<br><br>John