Hey everyone, I have another question about my intake I forgot to ask.  The Pacesetter Air F/X intake has a small hole that has a silicon tube attached to it and the instructions say to connect the vacuum tube (the silicon tube) to the factory location...... but I don't recall a factory location?  Anyone know what its talking about?   -Jaime

I HAVE THE PACESETTER INTAKE ALSO, TOMARROW ILL DIG MY WAY THROUGH MY GARAGE
TO WHERE MY PROBE HIBERNATES TO LOOK FOR YOU

It is talking about were the little black hose that went to your air box so replace it look for a little black hose it is hard to see so use a flash light.

  Jaime

First question: is it bad that I have been driving without it connected (I blocked the hole on the intake side). Second question: in what general area is it. I have a 93, so if I was looking at it from the front, would it be to the right or the left of the intake. Also, I have a good ol' Haynes manual, so could I find it in there? If so, what would I look up? Yah yah, I suck.... but how else ya gonna learn? =) -Jaime 93 Probe

it's on the left and it runs from a couple of steel tubes just about the throttle and toward the front of the car.