i took my 95 to an alignment shop because of braking problems and rattles, knocks and noises coming from the front end and rear. i could see that most of my bushings were shot befor i ever took it in, but i got an incredible price to repair inner and outer tie rod ends and replace bushings along with some other stuff....how hard is it to install the mn12 front suspension kit and tie rod ends? somebody help please!

I haven't replaced everything yet, but the stuff I have replaced isn't very hard. Some things you just can't do. Like press in and out some bushings and ball joints. You need special tools for things like struts and some other things. Most of it isn't hard, some of it just has't to go to somewhere else.

I just replace the whole control arm if the balljoint goes. I can get the arms cheaper than most people can get the balljoints and get them pressed in. I rented a spring compressor from Autozone to replace my springs around my front shocks. The only thing I have ever taken anywhere is tie-rod ends because of the alignment issues and I would rather just let them do it and align the thing while they have it.