|
Brandon,
I have a 95 626 2.0l (automatic) and had the exact
same problem over a year ago. When the OD light
flashes it indicates some sort of fault with the
transmission. The reason it shifts hard is once the
computer records a transmission fault, it goes into a
sort of default mode and the shift points are all out
of wack.
The best thing to do is take it into a mechanic
(ideally a transmission specialist) that can pull the
codes from the computer and determine if the fault is
mechanical or electrical.
I had my entire transmission rebuilt (clutch packs,
torque converter, etc.) before they realized that the
actual problem was a crack in the inner housing and
fluid was leaking from the inner housing to the outer
housing and the fluid pressures were all screwed up.
After they replaced it, everything was fine and it is
still going great a year later.
Hope you have better luck than I had...even though the
transmission is working great now, it cost a lot of
$$$ that I did not want to spend at the time.
Steve
|