|
Hello Group,
I have a 1993 Explorer Sport 4X4 with a 5-speed
manual transmission and part time hubs and 2-speed
transfer case. I have 120,000 miles and I had my
clutch assy and slave cylender and master cylender all
replaced. The clutch assy and slave cylender and
transmission was replaced at 104,000 miles and the
clutch master cylender shortly after.
The clutch will even slip on a level road.Just hit
the gas pedal hard and it will do the same as gooing
up hill.
The transmission was replaced because of the nylon
that was used to assemble some of the bearings in the
transmissiom. The transmission that was a total
rebuild. The total cost was about $2,000.00 that was
parts and labor together..
Art
|