|
I don't know if anyone saw or not, but A week or so
ago I posted about a turbo manifold I made for a
Probe. It is the stock header cut and reworked to fit
a TD04 1st gen. DSM turbo to the 2.0 without having to
remove the A/C (almost all DSM turbos will fit, but
the A/C will have to go with the larger ones). I
decided to go with an Air Research T-3 instead, and
had to build a different manifold. I would like to
see one of you guy use it, if not it will be going on
Ebay. E-mail me any questions.
Bill
95 PSE
T-3, Aeromotive pressure regulator, custom 3"
exhaust, Volvo 740T front mount inter-cooler w/custom
pipes, 450cc injectors, 95 Couger MASS air housing,
SAAB 900 BOV, front and rear strut bars, rear drum to
disc conversion.
Soon to have ceramic coated pistons, Holley 255lph
fuel pump, MSD ignition, and a reworked head w/J-SPEC
intake cam.
|
turbo manifold for 2.0L probe
Dec 2 2003, 08:02 AM
